How To Jump A Car

Driving a car is an amazing experience, but it can become frustrating when you get stuck on the side of the road with a dead battery. Jumpstarting a car is an essential skill every driver should know. It can save you time and money instead of waiting for help. In this article, we’ll go over the steps to jumpstart a car safely and easily.

Step 1: Prepare for the Jumpstart

Before you get started, you need to make sure you have the necessary equipment. This includes jumper cables and a functioning car. Also, ensure that both cars are put in park and turned off.

Step 2: Identify the Battery Terminals

The next step is to identify the battery terminals. The positive terminal is usually red and marked with a “+” symbol. The negative terminal is usually black and marked with a “-” symbol.

Step 3: Connect the Jumper Cables

Connect one end of the jumper cables to the positive (+) terminal of the dead battery. Then, connect the other end of the positive cable to the positive (+) terminal of the functioning car. Next, connect one end of the negative (-) cable to the negative (-) terminal of the functioning car. Finally, connect the other end of the negative cable to a metal surface away from the dead battery.

Step 4: Start the Functioning Car

Start the functioning car and let it run for a few minutes. This will allow the battery to charge.

Step 5: Start the Dead Car

Try starting the dead car. If it doesn’t start, let it charge for another minute or two. It should start now.

Step 6: Disconnect the Jumper Cables

When the dead car starts, it’s time to disconnect the jumper cables in the reverse order you connected them. Start by removing the negative cable from the metal surface, then the negative cable from the functioning car’s battery, the positive cable from the dead battery, and finally the positive cable from the functioning car’s battery.

Step 7: Let the Battery Charge

After starting the car, let the engine run for at least 30 minutes to allow the battery to recharge.

Step 8: Check the Battery

If the battery was dead, something caused it to fail. Check the battery’s health level and charge it fully before using it again. If it continues to fail, consult a mechanic.

Conclusion

Jumpstarting a car is not rocket science, but it requires some attention to details. This procedure can save you time and money when you’re stranded with a dead battery. Follow these steps to jumpstart your car safely and easily. Remember to take care of your car’s battery to keep it in good health.

Leave a Comment